References

52 Iran ESCO Esfahan Steel Company January 2016
Engineering, delivery, commissioning and erection of a tandem mill train for a section mill
51 Iran ESCO Esfahan Steel Company September 2015
Engineering, delivery, commissioning and erection of a rail finishing line
50 Russia OAO Revjakinski Metallprokatneu Sawod December 2013
Engineering, delivery and commissioning of flying shear
49 Turkey/Iran CTS Izmir/FAICO Steel Co. Ltd. June 2013
Engineering of complete set of mill stand gear boxed for medium section mill
48 Germany Salzgitter AG (Standort Ilsenburg) August 2013
Engineering, delivery, erection and commissioning of roller table for plates with max. weight of 32 t
47 Switzerland Swiss Steel AG (Standort Emmenbrücke) August 2013
Engineering, delivery, erection and commissioning of crank lever shear
46 Switzerland Swiss Steel AG (Standort Emmenbrücke) August 2013
Manufacturing, delivery, erection and commissioning of cooling bed extension
45 Russia Evras Holding June 2013
Engineering, delivery and commissioning of dividing shears and pinch rolls
44 Switzerland Swiss Steel AG (Standort Emmenbrücke) July 2012
Detail Engineering for increasing of cooling bed
43 Switzerland Swiss Steel AG (Standort Emmenbrücke) July 2012
Engineering, delivery, erection and commissioning of a pinch roll unit downstream furnace
42 Turkey/Iran CTS Izmir/FAICO Steel Co. Ltd. October 2013
Engineering, delivery, erection and commissioning of bar rolling mill 400,000t/y
41 India Viki Industries December 2013
Engineering, design erection and commissioning of bar rolling mill 400,000t/y
40 Turkey/Iran CTS Izmir/FAICO Steel Co. Ltd. February 2014
Engineering, delivery, erection and commissioning of medium section mill 500,000t/y
39 Russia ZAO Omutninsker Metallurgisches Werk June 2012
Engineering, delivery, erection and commissioning of special tilting devices, cooling bed and finishing line for special profile, long product rolling mill
38 Switzerland Swiss Steel AG (Standort Emmenbrücke) August 2011
Engineering, delivery, erection and commissioning of pinch roll units for Garrett coiler
37 India Kamachi Sponge & Power Corp./Chennai December 2010
Engineering and detail design for furnace group equipment with cold and contiguous hot charging of casted billets
36 China/ Germany CM Chemiemetall (Standort Bitterfeld) November 2010
Inspection of rolling mill and technical study
35 Germany BGH Freital October 2010
Pass design and technological calculation to roll rounds of special steel
34 Ukraine ZAO Metallurgisches Werk (Standort Makeewka) September 2010
Engineering of transfer cars and delivery, erection and commissioning with two wire binding machines
33 Korea Daehan Steel Co.Ltd Busan September 2010
Engineering delivery, supervision, erection and commissioning of multiply strand bar cooling line
32 India Kamachi Spong & Power Corp./Chennai December 2010
Engineering, design erection and commissioning of bar rolling mill 400,000t/y
31 Ukraine ZAO Metallurgisches Werk (Standort Makeewka) Commissioned June 2009
Supervisison of erection and commissioning of 720,000 t/y small section mill
30 Switzerland Swiss Steel AG (Standort Emmenbrücke) August 2008
Engineering and delivery for revamping of coil chain conveyor
29 Austria Braun Maschinenfabrik GmbH November 2008
Engineering and detail design for turn over cooling bed downstream forging machine diam. 80 mm to 320 mm
28 Germany BGH Freital October 2008
Rolling technology and pass design for rolling of 5.0 mm dia. wire rod of stainless steel
27 Switzerland Swiss Steel AG (Standort Emmenbrücke) September 2008
Basic engineering for increasing of cooling bed
26 Saudi Arabia Al Ittefaq Steel Products Company August 2008
Supervision of erection and commissioning of equipment for second hand section mill
25 Switzerland Swiss Steel AG (Standort Emmenbrücke) August 2008
Engineering, delivery, erection, commissioning of unloading station for coils
24 Russia OAO Belorezky Metallurgisches Kombinat September 2008
Engineering, delivery, erection, commissioning of continuous descaling system for billets
23 Germany BGH Freital June 2007
Rolling technology and pass design for blooming mill
22 Switzerland Swiss Steel AG (Standort Emmenbrücke) August 2007
Engineering and delivery of equipment for revamping of coil handling station
21 India Durgapur Steel Plant May 2007
Engineering and design for new three high mill stands
20 Switzerland Swiss Steel AG (Standort Emmenbrücke) August 2007
Revamping of Garret-coiler
19 Germany ENA GmbH / Freiberg July 2007
Development, engineering and design of strip coiler for magnesium strips
18 India Rana Udyog (Kolkata) May 2007
Engineering of wire rod block, laying head and pinch roll 60 m/s
17 Germany Lech-Stahlwerke (Meitingen) October 2006
Engineering and installation of equipment for section mill
16 Ukraine ZAO Metallurgisches Werk (Standort Makeewka) June 2007
Engineering and delivery of equipment 720,000 t/y for installation of section mill
15 Saudi Arabia Al Ittefaq Steel Products Company June 2007
Engineering and delivery of equipment for 1,000,000 t/y revamping and installation of second hand section mill
14 Switzerland Moos Stahl AG (Standort Emmenbrücke) June 2006
Installation of quenching line for bars
13 Germany Peiner Träger GmbH (Salzgitter AG) January 2006
Installation of compacting devices for packs of I-beams
12 Germany Peiner Träger GmbH (Salzgitter AG) January 2006
Installation of guide tables with water cooling devices for I-beams
11 Germany Freiberg University January 2006
Installation of mill guides for reversing two-high mill stand
10 Germany Riva-Group (Hennigsdorf) July 2005
Revamping of continuous caster
9 Germany Salzgitter AG July 2005
Revamping of coil transportation system
8 Germany Peiner Träger GmbH January 2005
Revamping of gag press
7 Russia OAO Belorezky Metallurgisches Kombinat October 2004
Technological and benchmarking study for future development of wire rod mill
6 India Rana Udyog (Kolkata) August 2004
Engineering of two strand wire rod blocks 215
5 Germany Peiner Träger GmbH (Salzgitter AG) August 2004
Design and delivery of new spindle bearing arrangement
4 Russia OAO OEMK Oskol Electrometallurgical Plant October 2004
Abrasive cutting machine (in cooperation with Braun Maschinenfabrik Austria)
3 Germany MKM Hettstedt January 2004
Revamping of slitting shears
2 Austria Plansee AG June 2003
Development of hot rolling technology for foils of high-strength non iron metals
1 Germany Freiberg University May 2002
Revamping of hot strip mill (0.5 mm at up to 20 m/sec) Housingless mill stand H340

The founders of MWE, Dr.-Ing. Michael Krampitz and Dipl.-Ing. Frank Clement, just like the design engineers in charge, worked for SKET’s businesses for years. Under a licensing agreement signed with SKET, they rely on their individual experience in mechanical and plant engineering, and SKET’s portfolio of expertise in long-product rolling mills.

Last References of SKET-company

Wire rod mills

Thailand  Rayong 1999
High speed wire rod mill 100 m/s;
Housingless mill stand 600, 440, 340, 280
300 000 t/y
 Taiwan  Yieh Hsing 1997
   High speed wire rod mill 100 m/s;
Housingless mill stand 600, 440, 340, 280
300 000 t/y

Small-section mills

Germany Georgsmarienhütte 2000
Cooling bed equipment and finishing line 950,000 t/y
Russia Oskol 1990
Small and medium-section mill 350;
Housingless mill stand 600, 440, 390, 340
1,000,000 t/y
Czech Republic Trinec 1989
Heat treating line (THERMEX ®)

Medium section mills

PR China Jiang Yin 1997
Medium section mill;
Housingless mill stand 760, 670, 700,000 t/y
Cuba Havana 1983
Medium and small-section mill 320 245,000 t/y

Finishing shop

Thailand Rayong 1999
Garret coiler 14 m/s for existing wire rod mill
Romania Calarasi 1990/91
Piling line for heavy sections
India Vishakhapatnam 1989/90
Medium-section finishing shop 500 700,000 t/y